Twiggy

Twiggy Igniter Each Price: $1.25 each Shipping: (see below) Shipping is by USPS Ground.

Order Online PayPal or Credit Card - OR - Order by Mail Mail Ordering Help

Note:
All QuickBurst Igniters are now sleeved. This is due to USPS shipping regulations. The Twiggy and Super Fat Boy have white sleeves, the Slim Gem and Fat boy have clear sleeves. This sleeve needs to be removed prior to use. Use a utility knife, or other thin sharp blade to cut a slit down the side of the igniter then peel the sleeve off. .


LEUP or Equal REQUIRED.

To order:

QuickBurst must have a copy of your BATFE Explosives Permit and your "Statement Of Intended Use" on file prior to placing order. I will include a copy of my permit with your order.

Send a copy of your Permit, signed in blue ink to:

David Bachelder
DBA~QuickBurst
59 Elm CT
Lake Jackson, TX 77566

or Fax to: 979-258-3458

Hazmat Fees are NOT REQUIRED. Your package will arrive via USPS Ground. Tracking numbers will be furnished, if a valid e-mail address is provided.

The Twiggy is designed for those "F" and "G" class Econojet or RMS motors.  Its unique oval shape and the 22-gauge wire allows for insertion through the smaller nozzles to bottom out into the "C slot" grain geometry found in these engines.  Approximate measurements: 1/2 inch long and 1/8 inch OD (.125) at the widest point.  The thickness of the oval is approximately 3/32 inch (or .093) with 15-inch leads.  Using 12 volts, these high energy igniters will burst into flames with rapid combustion, similar to a sparkler, and burn at about 3,500 degrees F.  They will reliably ignite sugar motors, composites, black powder or anything that will burn.  Moisture and shock resistant.